Ethernet+WiFi Stainless Steel Automatic Weighing Indicator CE

• Customization: Available
• After-sales Service: After-Sale Service
• Warranty: One Year
• Model NO.: BM1000P PANEL
• Accuracy: 0.1g
• Display Type: LCD
• Display Digits: 6 digits
• Measure Method: Automatic
• Shell Material: Stainless Steel and Plastic
• Application: Commercial
• Certification: CE
• Customized: OEM Is Possible If The Quantity Is Big
• Options: Ethernet+WiFi
• Keyboard: 7-Key Multifunction
• Function: Tare Fixing and Count Pieces
• Communication Ports: 1 RS232 Port
• Protection Class: IP54
• Power Supply: 115 V or 230 V AC
• Connection: Weight Repeater
• Ticket: Multiple Pre-Configured
• Transport Package: Foam and Carton
• Specification: Please Contact
• Trademark: MARQUES
• Origin: China
• HS Code: 8423900010
• Production Capacity: 20000PCS /Year

Product Description

Product Description

Weighing indicator
1. BM1000P PANEL +REPEATER
2. BM1000P PANEL is also available
3. Used for airport weighing and controlling systems
4. Built-in version can be installed in controlling cabinet

Product Parameters

Normal weighing
Put the product on the weighing platform, the weight appears on the indicator.

Tare and FIX Tare
Put the container on the platform. Press the Tare key, the Net symbol should light.
To fix a tare, press the FIX Tare key on the BM1000 or F1 on the BM1000 Top versions, the Net and Fix symbols should light. In this mode when the load is removed from the plate the tare value is kept. To remove the fixed tare remove the load and press the Tare key on the BM1000 or F1 on the BM1000 Top versions.

Zero Key
The semi-automatic zero setting device can be activated by pressing the Zero key.
The zero margin is ± 2% of max capacity. This operation will be denied if this margin is not respected and an audible signal will be emitted.

Adjustment
The adjustment key is accessed by an orifice located on the back cover of the indicator and protected by a self-destructible seal to prevent unauthorized access.
Before proceeding please make sure to meet the following requirements:

• The instrument must be powered on for at least two hours;
• Controlled loads must be present according to the scale capacity.

Before entering the adjustment mode the indicator must first be put in "Service Mode".
During the initial display count-down, simultaneously press the Shift + Enter for three seconds. The count down will stop and in the end of the three seconds an audible signal will be emitted, after this you can release the keys.
In order to proceed with the adjustment process, the physical seal must be broken to give access to the adjustment key orifice that unlocks and accesses the adjustment menu.
The first parameters are explained in the following table, to jump through these parameters press the Enter key.
 

Type of tare (t1)	0 1 2	Normal Tare Tares everything No tare
Value of auto-tare (t2) If the weight is in the selected margins for 5 seconds, the auto tare function will be executed. (value in weight steps)	0 1 2 3 4 5 6 7 8 9	Normal 1 2 3 4 5 18 21 24 27
Value of auto-zero (t3) When the equipment is switched on, the scale makes the auto-tare or not depending on the selected parameter.	0 1 2	Normal Auto-zero disabled (assumes zero from adjustment) Auto-zero disabled (assumes zero from the adjustment or from the last manual zero, as well as the temporary or fixed tares effectuated during the operation)
Auto-tare margin (t4)	0 1 2 3 4 5 6 7 8	4% (Normal) 6% 8% 10% 12% 14% 16% 18% 20%
Zero Stability (t5) (value in divisions)	0 1 2 3 4 5 6 7 8 9	0 0 4 6 8 10 15 25 50 100
Net / Gross indication (t6)	0 1	Can't visualize the gross weight Can visualize the gross weight through Shift + →T←/Tare
Pass through Zero (PcER) Forces the passing through Zero between printing operations	0 1	Passing through Zero or under the minimum weight is required Only a change over 50 divisions is required
Minimum weight (Pmin) Printing behaviour regarding the minimum weight	0 1	Print only allowed with loads over the permitted minimum (20e) Printing is always allowed
Class* 0,2 - ∑min ≥ 1000 divisions 0,5 - ∑min ≥ 400 divisions 1 - ∑min ≥ 200 divisions 2 - ∑min ≥ 100 divisions	0 1 2 3	Class 0,2 Class 0,5 Class 1 Class 2

 

 

Company Profile

 

Factories&Equipments

Our Exhibitions

 

Our Advantages

 

1.  Fast replied until 12 hours.

2.  OEM/ODM are welcome.

3.  We provide samples.

4.  All products have been tested by High-Quality Area.

5.  All products have one year of warranty.

6.  We have our own R&D Professional team.

7.  We have our own IT area that develops our own system making it easy and fast for customizations.

8.  All products have high quality and European standards.

9.  All process is made by us making it possible to give a competitive price.

10.  Team fully prepared to give you full support.